Best Drill Bits for Steel (2026): 8 Cobalt and Specialty Picks, From Mild Steel to Stainless

David Smith

Best Drill Bits for Steel

The strongest drill bit for steel is a cobalt bit with a 135 degree split point. For the hardest steel and stainless, look at M42 (about 8% cobalt). For most other steel work, M35 (about 5% cobalt) does the job and is less likely to chip. This guide sorts 8 sets from Amazon by those details and by the steel you are drilling.

Quick Picks

Comparison Table

Prices and ratings are from Amazon on 2026-11-11 and change often.

Product Cobalt grade Pieces Size range Point Price Rating
BOSCH CO14B M42, 8% 14 1/16 to 1/2 in Not stated $46.74 4.6 (7,346)
IRWIN 3018002 M35, 5% 29 1/16 to 1/2 in 135° split $155.99 4.7 (1,075)
Drill America DWD29J-CO-PC M35 29 1/16 to 1/2 in 135° split $106.08 4.5 (1,065)
DEWALT DWA1240 Cobalt alloy (grade not stated) 14 Not stated Pilot point $30.63 4.6 (2,494)
STROTON Metric M42, 8% 19 1 to 10 mm 135° split $36.89 4.4 (4,894)
13-Piece M35 Set M35 13 1/16 to 1/4 in 135° $9.98 4.3 (2,806)
Drill America D/ACO M42 29 1/16 to 1/2 in Not stated $166.06 4.2 (23)
toolant Step Bit M35, TiAlN coated 1 step bit 3/16 to 7/8 in Step $22.39 4.3 (2,231)

Which Bit for Which Steel?

Steel Start with Why
Mild steel, angle iron, brackets M35 cobalt set Cobalt is more than soft steel strictly needs, and the budget M35 set costs under $10.
Hardened steel M42 cobalt Higher cobalt for heat and wear. Go slow.
Stainless steel M42 or M35 cobalt, with cutting oil Stainless hardens as it heats, so keep the bit cutting and cool.
Thin sheet steel Step bit One bit makes several hole sizes in thin metal.

The Best Drill Bits for Steel

1. BOSCH CO14B 14-Piece Cobalt Set – Best Overall

BOSCH CO14B 14-Piece Cobalt Drill Bit Set With Case | Drill Bit Sets, Metalworking Tools, Bosch CO14B Twist Drill Bit Set, Drill Bits, Cobalt Drill Bits, cast iron

This is the set most buyers should look at first. It costs $46.74 and rates 4.6 stars across 7,346 ratings, the biggest review base in this guide among the name-brand cobalt sets.

BOSCH CO14B 14-Piece Cobalt Drill Bit Set With Case | Drill Bit Sets, Metalworking Tools, Bosch CO14B Twist Drill Bit Set, Drill Bits, Cobalt Drill Bits, cast iron

The listing states M42 cobalt with 8% cobalt, jobber-length bits, a surface-hardened tip and a thick web-helix design for stability. Bosch claims 10 times the life of standard bits. That is the maker’s figure and we could not verify it. The sizes run from 1/16 inch to 1/2 inch.

Key specs: M42, 8% cobalt; jobber length; surface-hardened tip; thick web-helix; 14 pieces; includes case (per listing).

Pros: M42 at a mid-range price; large review base; case included.

Cons: Only 14 pieces, so some sizes are skipped. The listing does not state the point angle. Pro Tool Reviews says M42 is harder but more brittle than M35 (Pro Tool Reviews, retrieved 2026-11-11), so keep side load off the bit in a handheld drill.

Not the right fit if: you want every 64th size in one case. A 29-piece set suits that better.

Check Price on Amazon

2. IRWIN 29-Piece M35 Cobalt Set (3018002) – Best Large Set

IRWIN Drill Bit Set, M35 Cobalt Alloy Steel Steel, 29-Piece (3018002)

This is the priciest set of the main picks at $155.99. It rates 4.7 stars across 1,075 ratings, the highest rating here.

IRWIN Drill Bit Set, M35 Cobalt Alloy Steel Steel, 29-Piece (3018002)

You get 29 bits from 1/16 inch to 1/2 inch in 1/64 inch steps. The listing states 5% cobalt alloy steel, a 135 degree split point to reduce walking and a heavy-duty web.

Key specs: M35, 5% cobalt; 29 pieces; 1/16 to 1/2 in by 1/64 in; 135° split point; heavy-duty web (per listing).

Pros: Every common size covered; top rating; split point for clean starts.

Cons: The price is high next to the Drill America M35 set below. M35 is the lower cobalt grade.

Not the right fit if: you drill steel a few times a year. A smaller set costs far less.

Check Price on Amazon

3. Drill America DWD29J-CO-PC 29-Piece M35 Set – Best 29-Piece for Less

Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16' - 1/2' X 64ths), DWDCO Series

It costs $106.08 and rates 4.5 stars across 1,065 ratings. That is about $50 less than the Irwin set with a similar review count.

Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16' - 1/2' X 64ths), DWDCO Series

The listing describes M35 cobalt in 29 jobber-length sizes from 1/16 inch to 1/2 inch in 64ths, a gold oxide finish, a self-centering 135 degree split point and ANSI specification. It comes in a round case.

Key specs: M35 cobalt; 29 pieces; 1/16 to 1/2 in by 1/64 in; gold oxide; 135° self-centering split point; ANSI (per listing).

Pros: Full size range at a lower price than Irwin; split point works without a pilot hole, per the listing.

Cons: Slightly lower rating than Irwin. Same M35 grade.

Not the right fit if: you want a case with a flat lid for a drawer. This one is a round case.

Check Price on Amazon

4. DEWALT Cobalt Pilot Point 14-Piece (DWA1240) – Best Cheap Name-Brand Cobalt

DEWALT Cobalt Alloy Steel Drill Bit Set with Pilot Point, 14-Piece (DWA1240)

At $30.63 and 4.6 stars across 2,494 ratings, this is the cheapest name-brand cobalt set here.

DEWALT Cobalt Alloy Steel Drill Bit Set with Pilot Point, 14-Piece (DWA1240)

The listing names cobalt alloy steel and a pilot point. It does not state the cobalt percentage, so we cannot call it M35 or M42. The case has a clear lid, a clip latch and a bit-bar design for easy removal, and fits the Small and Medium ToughCase+ (sold separately).

Key specs: cobalt alloy steel (grade not stated); pilot point; 14 pieces; clear-lid case (per listing).

Pros: Low price for a name brand; case fits DEWALT’s storage system.

Cons: No cobalt grade or size range on the page we read. Fewer sizes than the 29-piece sets.

Not the right fit if: you need to know the exact cobalt grade before you buy.

Check Price on Amazon

5. STROTON Metric M42 Cobalt 19-Piece (1-10 mm) – Best Metric Set

Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)

Most sets in this guide are inch sizes. This one is metric. It costs $36.89 and rates 4.4 stars across 4,894 ratings.

Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)

The listing states M42 with 8% cobalt, a 135 degree split point and sizes from 1 mm to 10 mm in 19 pieces. The seller quotes 68 to 70 HRC. That is the seller’s number and we could not verify it. The bullets also say a cobalt bit has the lowest cost per hole, which is a sales claim.

Key specs: M42, 8% cobalt; 135° split point; 19 pieces; 1 to 10 mm (per listing).

Pros: M42 at a low price; metric sizes for imported machinery and bolts.

Cons: Rating is lower than the Bosch set. Nothing above 10 mm.

Not the right fit if: your fasteners and taps are inch sizes.

Check Price on Amazon

6. 13-Piece M35 Cobalt Set (1/16 to 1/4 in) – Best Budget Cobalt

MACXCOIP 13Pcs(1/16'-1/4') Cobalt Drill Bit Set M35 HSS Jobber Length | for Hardened Metal, Stainless Steel, Cast Iron, Wood and Plastic, with Index Storage Case

This unbranded set costs $9.98 and rates 4.3 stars across 2,806 ratings.

MACXCOIP 13Pcs(1/16'-1/4') Cobalt Drill Bit Set M35 HSS Jobber Length | for Hardened Metal, Stainless Steel, Cast Iron, Wood and Plastic, with Index Storage Case

The listing states M35 cobalt HSS, jobber length, a 135 degree tip and 13 sizes from 1/16 inch to 1/4 inch. It comes with a case that has a size index.

Key specs: M35 cobalt HSS; 135° tip; 13 pieces; 1/16 to 1/4 in; case with size index (per listing).

Pros: Very low price; covers the small sizes most jobs need.

Cons: No brand in the title. Nothing above 1/4 inch. The lowest rating among the sets we would suggest.

Not the right fit if: you need holes larger than 1/4 inch.

Check Price on Amazon

7. Drill America 29-Piece M42 Set (D/ACO Series) – Best M42 at the Top End

Drill America 29 Piece m42 Cobalt Drill Bit Set (1/16' - 1/2' X 64ths), D/ACO Series

This is the most expensive set here at $166.06. It rates 4.2 stars, but across only 23 ratings, so treat that number loosely.

Drill America 29 Piece m42 Cobalt Drill Bit Set (1/16' - 1/2' X 64ths), D/ACO Series

The title names an M42 cobalt set of 29 bits from 1/16 inch to 1/2 inch in 64ths. The listing describes round shanks, gold oxide and a metal case. Pro Tool Reviews picked Drill America M42 bits as its top choice for hardened metal and stainless steel (Pro Tool Reviews, retrieved 2026-11-11). We did not confirm that this exact listing is the set they tested.

Key specs: M42 cobalt; 29 pieces; 1/16 to 1/2 in by 1/64 in; round shank; gold oxide; metal case (per listing).

Pros: The M42 grade in a full size range.

Cons: Highest price. Very small review base. No point angle stated.

Not the right fit if: you drill mostly mild steel. Cheaper M35 does that job.

Check Price on Amazon

8. toolant M35 Cobalt Step Drill Bit (3/16 to 7/8 in) – Best for Sheet Metal

toolant M35 Cobalt Step Drill Bit, 3/16'-7/8', TiAlN, 1/4' Hex Shank | M35 Cobalt HSS; TiAlN Coating; Four Spiral Flutes; 1/4' Hex Shank Unibit; Metal/Stainless/Aluminum/Plastic

A step bit is not a twist bit, but it earns a place for thin steel. It costs $22.39 and rates 4.3 stars across 2,231 ratings.

toolant M35 Cobalt Step Drill Bit, 3/16'-7/8', TiAlN, 1/4' Hex Shank | M35 Cobalt HSS; TiAlN Coating; Four Spiral Flutes; 1/4' Hex Shank Unibit; Metal/Stainless/Aluminum/Plastic

The listing describes an M35 cobalt HSS bit with a TiAlN coating and four spiral flutes. It has a 1/4 inch hex shank and is aimed at sheet metal up to about 1/8 inch (3 mm) thick. The sizes listed run from 3/16 inch to 7/8 inch.

Key specs: M35 cobalt HSS; TiAlN coating; 4 spiral flutes; 1/4 in hex shank; 3/16 to 7/8 in (per listing).

Pros: One bit covers many hole sizes; the listing names a 1/4 inch hex shank.

Cons: The listing is for sheet up to about 1/8 inch thick, not thick plate. The bullet text says 12 steps but lists 10 sizes.

Not the right fit if: you drill thick steel plate. Use a twist bit.

Check Price on Amazon

M35 vs M42: What the Numbers Mean

M35 has about 5% cobalt. M42 has about 8%. Pro Tool Reviews describes M42 as harder and longer-lasting but more brittle and more expensive. It describes M35 as less hard but tougher, which suits handheld drilling (Pro Tool Reviews, retrieved 2026-11-11). That fits how we sorted these picks. For plain steel in a handheld drill, M35 is a safe choice. For stainless or hardened steel, M42 is worth the money if you can hold the drill steady.

How to Choose Drill Bits for Steel

Cobalt grade

Look for “M35” or “M42” in the title. If a listing says only “cobalt” or “cobalt alloy”, the grade is unknown.

Point angle

A 135 degree split point is the common choice for steel. The listings above say it helps the bit start without walking. Check the listing, since not every set states it.

Set size

A 29-piece set covers every 1/64 inch size from 1/16 to 1/2 inch. A 13 or 14-piece set skips some. If you drill the same few sizes, a smaller set is the better buy.

Brand and review count

Several unbranded 99 and 115-piece cobalt sets sit between $60 and $138 on Amazon, with ratings near 4.4 and far fewer reviews than the Bosch or Irwin sets. Piece count is not a sign of quality.

Case

A case with size marks saves time. The Bosch, DEWALT and Drill America sets are all listed with a case.

How to Drill Steel Without Ruining the Bit

  1. Clamp the work. A loose piece spins and can hurt you.
  2. Mark the spot. A split point reduces walking at the start, per the listings above.
  3. Go slowly. Pro Tool Reviews notes that stainless steel hardens as it heats, so it advises slow drilling with just enough pressure for steady chip removal (Pro Tool Reviews, retrieved 2026-11-11).
  4. Use cutting oil. The same page recommends cutting oil for stainless and drilling oil with HSS bits.
  5. Do not let the bit rub without cutting. If it only squeals and does not make chips, stop and check that it is sharp.
  6. Wear eye protection. Hot steel chips fly.

We have not listed exact RPM numbers, because the sources we checked do not give a single safe figure. Check the maker’s chart for your bit size and steel.

When a Twist Bit Is the Wrong Tool

For thin sheet steel, a step bit makes cleaner holes in several sizes. For very large holes, Pro Tool Reviews prefers carbide hole saws such as the Milwaukee Hole Dozer line. If you are drilling holes for pop rivets, our rivets guide has a drill bit chart. For stripped screws or broken bolts that you need to remove, see our screw extractor guide.

FAQ

What is the strongest drill bit for steel?

A cobalt bit, and for the hardest steel an M42 cobalt bit with about 8% cobalt. Among the sets above, the Bosch CO14B and the STROTON metric set are listed as M42.

What is the difference between M35 and M42?

M35 has about 5% cobalt and M42 has about 8%. M42 is harder and holds its edge longer but is more brittle and costs more. M35 is tougher.

Do I need cobalt bits for mild steel?

Not strictly. Cobalt is built for harder metals, so it is more than soft mild steel needs. The budget M35 set above costs under $10, so the price gap is small.

What is the best drill bit for stainless steel?

An M35 or M42 cobalt bit, run slowly with cutting oil. Stainless steel work-hardens as it heats, so a dull bit that rubs makes things worse.

What is the best drill bit for hardened steel?

M42 cobalt is the usual answer. Pro Tool Reviews chose Drill America M42 bits for hardened metal. Drill slowly and keep the bit cool.

Is a 135 degree split point better than 118 degrees?

The listings above say a 135 degree split point helps the bit start without walking, and it is the angle most of these sets use. We did not compare 118 degree bits.

Why does my drill bit smoke and go dull?

Heat. Common causes are too much speed, not enough pressure to cut, and no lubricant. Slow down, let the bit cut, and add oil.

Are the 99-piece and 115-piece cobalt sets worth it?

We would not pick them over the branded sets above. The ones we saw have far fewer reviews than the branded sets, and piece count alone says nothing about quality.

Bottom Line

Match the grade to the job, then the set size to your budget.

Clamp the work, go slow and use cutting oil.

Leave a Comment